CO Carbon Monoxide  Monitor and Controller

              Real time monitoring carbon monoxide level with range from 0 to 1000ppm

             Semiconductor sensor with 5 years long lifetime

              LCD can display CO, temperature and humidity, also ventilation device status etc.

              Full time monitoring CO level, even the slightest leak can be detected

    u     It can work as a alarm or controller of carbon monoxide, also as a transmitter

     Provide up to 0～10V analog output and 2 relay dry contact outputs

   Two alternatives for the analog output: linearized over full range output or PID control output

   Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm

   RS–485 communication interface, 15 KV antistatic protection, independent address setup

Applications:

Carbon monoxide is a deleterious gas with colorless and odorless character , which could be absorbed by lung quickly, the speed rate of combination of CO and hemoglobin more than 250 times with oxygen, then stops oxygen circulation around the body; which have big character of heavy toxicity, so CO poisoning have became a big problem around the world.

F2000IAQ-CO is used to monitor room CO level and temperature as well as relative humidity. With one 0~10VDC analog output and two dry-contact of relay outputs, F2000IAQ-CO can be as a programmable logical controller to direct control a ventilation system, and also as a transmitter of CO level to connect with a DDC/PLC.  

F2000IAQ-CO can provide RS-485 communication interface to connect it with a PC or another control system, so make each room ventilation system be managed and controlled intelligently. It’s as a prevent monitor of CO potential leak and a controller of ventilation system in bellows application.  

       Human environment, Industrial environment

       Underground parking lot, maintenance garage

        Freezing machine room and other places where air quality is easy to worsen