Indoor Ozone Indicator/ Controller

Ozone + Temperature Monitor and Alarm

Model F09E-O3 Series

u        Real time monitoring ambiance ozone level

 u        Preset two stages alarm points for ozone measurement

 u        LCD display with three color backlight

 u        Provide up to 1x analog outputs and 2xrelay outputs

 u        RS485 communication Interface

 u        High performance, low price

    Features:

 u Design for real time monitoring ambiance ozone level and temperature

 u Gentlest shape and convenient structure

 u Trusty quality with lower prices

 u Particular LCD display with three color backlights

 u LCD displays ozone level and temperature measurements

 u Electrochemical ozone sensor with 0~5ppm (0~5mg/m3),high sensitivity

 u   Two stages alarm preset

 u   Both alarm way: buzzer alarm and backlight coloursswitch

 u   Provide up to 0～10V analog output and 2 relay dry contact outputs

 u   Humidity measurement and display optional

 u   RS–485 communication interface, 15 KV antistatic protection

 u   Provide two easy methods for calibration and setup alarm points by end users: infrared remote controller and a software via RS485

（Ozone Detector/Indicator）Indoor Ozone Indicator/ Controller

F2000TSM-O3 Series

n         Real time detect and indicate indoor ozone level

n         Featured 6 LED indicator lights indicates different O3 levels

n         Five years lifetime

n         Provide 1x dry contact output to control a fan or an O3 generator

n         Provide RS485 communication interface to be connected with a PC or DDC/PLC

n         The highest performance with the lowest price

F2000TSM-O3 is used to indicate environment ozone level. With its dry-contact of relay output, a fan or an O3 generator can be controlled turning-on/off when ambient O3 measurement reaches its pre-set point. 

F2000TSM-O3 can provide RS-485 communication interface with independent address, it can be connected with a PC or another control system to make management and control intelligently.  

Features:

u       Wall mounting, real time detect O3 with measuring range as 10~1000ppb.

u       With semiconductor ozone gas sensor inside. More than 5 years lifetime.

u       Full time indicate O3 level, special design with 6 indicator lights to indicate different O3 levels.

u       Six different ozone range corresponds with different lights indicating.

u       The on/off output optional for control a fan or an O3 generator.

u       Four setting ozone level ranges can be selectable to control the relay output via a set of jumpers.

u         RS-485 communication interface optional with 15KV antistatic protection, independent address setting.