Industrial thermometer with k type sensor| k type high temperature thermometer|measure temperature of liquid or gel|surface temperature measuring thermometer with k type sensor

digital thermometer model: # 300 with k-type thermocouple sensor.

this thermometer is a digital hermometer for use with any K-type thermocouple as temperature sensor. temperature indication follows IEC584 temperature/voltage tables for K-type thermocouples.

1. Max. Display:1999
2. Measuring Range of temperature: -50℃~1300℃
-50℉~1999℉
3. Resolution: 0.1℃(-50℃~199.9℃)
1℃ (-50℃~1300℃)
0.1℉(-50℉~199.9℉)
1 ℉ (-50℉~1999℉)
4. Accuracy: ±0.3% ±1℃ (-50℃~199.9℃)
±0.3% ±2℃ (-50℃~1000℃)
±0.5% ±2℃ (1000℃~1300℃)
±0.3% ±2℉ (-50℉~1999℉)
5. Data Hold
6. Full Icon Display
7. Low Battery Display
8. Power: 9V Battery (NEDA 1604 or 6F22)
9. Sensor Type: K Type

how to measure temperature:

1.turn on the thermometer

2. plug the thermocouple into the thermocouple input connector

3.set the thermometer to desired function.

4.perform measurements by contacting the object beig measured with the probe sensor

5.read the temperature on the display.

k type thermomcouple

TP-K01 Bead probe  100cm length, with teflon tape insulation, maximum insulating temperature: 260℃, available for general condition, especially for complex and any place hard to reach.

TP-K02 immersion probe: 3.2x150mm metal sheath 100cm compensating wire. available for temperature measurement of liquid or gels.

TP-K03: 100cm compensating wire, 12.5x94mm, available for flat or curved surface measurement.